Remote counter
Remote Engine Hour Counter
€379.00
Out of stock
Never miss an important milestone of your machine again
Monitor your machine’s engine hours remotely via SMS
Add up to 5 users
Easily manage the user list via SMS commands
Set up to 10 alerts to be automatically reminded of scheduled services or maintenance operations
Customizable front plate
Wireless reprogrammable firmware
Compatibility:
Compatible with any machine using J1939 or ISOBUS CAN protocols
Mining truck / Road truck
Excavator
Electricity generator
Drill machines
Construction
Agricultural equipment (J1939/ISOBUS)
Contact us to check the compatibility of your equipment
Ruggedized design:
Designed for harsh environments, the remote counter features a fully sealed IP68 enclosure that protects against water, dust, and grease, combined with a rugged internal architecture that withstands shocks and vibrations.
Network and SIM card:
Optional SIM card supply
The remote counter uses a standard Nano SIM card and operates on the LTE Cat-1 network. Designed for global deployment, it supports the following frequency bands:
- LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/ B18/B19/B20/B25/B26/B28/B66
- LTE-TDD: B38/B39/B40/B41
- GSM/GPRS/EDGE: 850/900/1800/1900 MHz
Contact us to verify compatibility with your local cellular network. Custom network compatibility is also available on request.
Main characteristics:
- Power supply: 8-30V DC (110/240V AC version available on request)
- Power consumption: 15mA @24V (0.3W) / 4mA @24V for low power version
- Protected against polarity inversion
- CAN bus (J1939/ISOBUS) speed compatibility: 250 or 500 kbps (auto-detection)
- Deutsch DT 4-pin connector for machine interface
- Dimensions (counter only): 128x69x37mm
- Antenna gain: 8 dBi / dimensions: 125x22x3mm / Wire length: 3m / Fixation: 3m double-sided tape
- Operating temperature: -20°C to +65°C
- Ingress protection: IP68
Don't hesitate to contact us for any question
